Search:
Archives
- May 2018
- April 2018
- January 2018
- June 2017
- April 2017
- February 2017
- January 2017
- September 2016
- August 2016
- July 2016
- May 2016
- March 2016
S | M | T | W | T | F | S |
---|---|---|---|---|---|---|
1 | 2 | 3 | 4 | 5 | 6 | 7 |
8 | 9 | 10 | 11 | 12 | 13 | 14 |
15 | 16 | 17 | 18 | 19 | 20 | 21 |
22 | 23 | 24 | 25 | 26 | 27 | 28 |
29 | 30 | 31 |
FlashForge 3D Printers, New Model: Finder
- May, 25, 2016
- No Comments.
Great printer! The first one I received must have been a defect. The issues I had with the first one were:
1. The screen would shutdown in the middle of a long print.
2. The removable tray keeps popping out. I had to tape the tray in place so it wouldn’t pop-out or move in the middle of a job.
3. USB connection would constantly disconnect. I tried a different cable and had no success.
4. I could not get the filament to stick to the bed. Even the test cube did not come out square.
I received a replacement, and what a difference! I’m no longer having to unplug the unit for the screen to return. The removable tray now has a firm lock when it’s pushed in. No USB connection issues! And the included glue stick helps! The new one also has a thumb screw for leveling the bed, which is alot better than the black plastic nut it had before. The new one is very quiet, sometimes I cannot tell if it’s running. I also love how fast the extruder heats up. It takes less than a minute to heat up to 220 degrees. Great printer, I would highly recommend it!